October 22nd, 2009
There are many factors that will come into play when deciding on one of the two different accoutrements.
Why Leather?
Many people are allergic to the metal that most watches are made from, some people are even allergic to gold and silver, still fewer people can only wear platinum due to the inert quality of the metal. Rather than forking over the amount of money it would take in order to purchase a platinum wrist band, these types of people are more than likely to opt for the leather band, and probably the band that goes under the watch itself holding that metal away from the skin too. There are a plethora of different leather styles that can go with just about any style of watch you can imagine, from a slim, narrow leather band for the elegant slim line watches to thick impressive looking bands for the large multi-function watches.
Why Metal?
Some may even opt for leather for their dive watches, however most would probably opt for the metal band because of the imperviousness to water and the ease of cleaning and drying. There are many styles of metal watch bands, from the stretch type to a clasp type. There are narrow bands as well as wide ones. Your best bet is to take your watch in and hold it up to the different types of bands to see which one you prefer. Maybe try a watch on that already has that type of band attached. This is an item that will stay with your watch for a long period and you want to make sure you make a well considered decision.
Tags: leather watchbands, metal watches, watches
Posted in Uncategorized | No Comments »
October 21st, 2009
If you want to make a change to your watch, you may find something as simple as changing the buckle a satisfying operation. There are many styles of buckles in many configurations and as long as you make sure the buckle is the right width for your band, you should have no problem changing it. To put it in very simple terms, it’s not too much different than changing the roll of toilet paper in your bathroom.
Tools
The difference being of course the buckle is a lot smaller so you will need small tools to perform the compression of the spring bar that holds the buckle in place. You can use small screw drivers, and any other thin device that can fit between the buckle and the strap.
Changing The Buckle
All you need to do is stick the screwdriver or other small device between the buckle and the edge of the strap, catch the edge of the spring bar and push towards the strap, away from the buckle end. Be very careful doing this as if you aren’t, you may flip the spring bar and once they go for a road trip, they’re very hard to find due to their small nature. In order to install your new buckle, all you need to do is reverse your procedure, then your buckle will be installed and you’ll be all ready to go.
Tags: change, change watchband buckle, how to, screwdriver, tools, watchband buckle
Posted in Uncategorized | No Comments »
October 20th, 2009
If you own multiple self winding watches, you may want to invest in an automatic watch winder. There are many of these devices available; some wind just one watch at a time while others have multiple ports in order to wind multiple watches at the same time.
Resetting Watches
If you own a calendar watch that takes elaborate resetting practices, you might want to invest in a single unit just to make sure the watch never runs down so you save yourself the time of having to reset everything on the watch. It’s always a good idea to have a small screw driver available, you never know when you may need to take the back off your watch and replace the battery, or replace your band should it wear out.
Eyeglass Repair Kit
An eyeglass repair kit is a wonderful thing to keep around, especially if you also wear glasses. The screw driver in the kit is small and refined and will work well when dealing with the intricacies of a watch; it will also do double duty should you loose the screws in your glasses.
Leather Cleaner
If you have a leather band, you may want to have some leather cleaner and conditioner, if you have metal bands, care is easy, mild soap and water will do. In both cases, a nice old overused soft toothbrush will make a handy tool to get between the links of the metal or into the crevices of the leather, making sure you softly clean the band.
Tags: eyeglass repair, leather cleaner, resetting your watch, tools for watches
Posted in Uncategorized | No Comments »
October 19th, 2009
The Deployment or Deployant buckle is becoming very popular. Once they are fitted they cause significantly less abrasion and scuffing that is caused to your watch band by the pulling and tugging of it through a regular buckle, every time you put on or remove your watch.
Reasons To Use A Deployment Buckle
A high quality leather watch band that is fitted with a deployment clasp will retain it’s quality of newness for much longer than a watch that requires the band to be thread through a buckle every time it is put on or removed. These buckles are convenient to use, they are simple to fit and they are fully adjustable. These buckles can also be transferred from one compatible strap to another.
How To Change Your Buckle
If you decide you want to use a deployment buckle instead of the standard buckle, you will need to remove the buckle from the band and measure the width of the buckle, your deployment buckle needs to match this width. Different watch bands have different taper rates however most watch bands taper by approximately two millimeters at the buckle. This means a twenty millimeter watch strap will probably need an eighteen millimeter deployment buckle. If you’re not sure how to measure in order to get the right deployment buckle you may want to take your watch in with the band and original buckle still attached and have the watchmaker look at your watch and possibly install the new buckle for you.
Tags: changing your watch buckle, deployment buckle, longer lasting watch
Posted in Uncategorized | No Comments »
October 18th, 2009
You want to purchase a leather watch band but you don’t know how to tell if it really is leather? We have become very good at producing a material that looks and acts very much like leather but isn’t.
Is It Real?
This is fantastic cost wise, however for someone that wants real leather, it makes it harder for them to know they are getting the real thing. One way to determine if the material is leather is to stretch it slightly and look for pours, if the leather is real, you will see minute holes, we have not been able to duplicate this as of yet so if there are holes you have real leather.
Take Care Of It
Once you have your leather, you will want to take care of it. The first thing you will want to do after you purchase it is to condition it with a high quality leather lotion. Then condition it three or four times a year from then on out. If your leather gets dirty, and reacts with the chemicals of your skin, it may get a funny smell to it. In order to get rid of the smell and protect the durability of the band you will want to clean it with a cleaner made specifically for leather, then after cleaning it you will want to condition it with a leather conditioner. You don’t ever want to do one without the other as you will leave the leather open to drying out and degradation.
Tags: caring for your leather, leather watchbands, real leather, wristband
Posted in Uncategorized | No Comments »
October 17th, 2009
- The first thing you will need to do is determine how the band is attached. There is the standard attachment and the integrated attachment. Most have the standard style and they are the easiest to change.
- The next thing you need to do is to measure the distance between the two lugs on the watch case, this will tell you how wide your band can be. Measuring in millimeters will make it easier on you as most watches bands are figured that way. If you only have a ruler that measures inches, you can measure that way and then pull up a conversion chart on your computer to figure out the millimeters.
- The next thing to do is to measure your watch band once it is removed from the case. In order to do this, take a ruler and place the buckle off the end of the ruler so it won’t be measured. Then put the other strap end to end with the first one. This will give the total length of the strap you need. If you have purchased watches or bands in the past and never paid attention to the size of the band, you probably take a ‘regular’ sized band.
- Once you have determined the size of the band you require, you can get online or even go to a store and find bands that are your size. If your current band is close too being to small or too big you may want to adjust the size of the new band to take that into consideration.
Tags: how to size your wristband, measuring, sizing your watchband
Posted in Uncategorized | No Comments »
October 16th, 2009
There is a large multitude of stylish, durable watches on the market. As technology has advanced, watch makers have put their knowledge to good use. Watches of today are better put together at lower costs.
Watch For Every Occasion
If you want to have a watch for every occasion, you can do that too, but you don’t need to. Many every day watches can go out on the boat with you for the day and with a wipe down, be just as at home on your arm while you dance the night away with your significant other. This is all within reason.
Elegant Watches
A super snazzy looking gold watch in a slim case with diamonds in the number positions may be quite durable but it would look very out of place on your wrist while you’re out working in the yard.
Diving Watches
On the other hand, A diving watches are very well made and withstand more than most watches can, however it would also look out of place should you dress up in a tux and show up at a formal dinner wearing it.
The key to having a watch that can serve both purposes is moderation. Durability is getting easier and easier to find, where moderation comes in is that if you want a watch that can serve dual purposes, you will need to not go towards either extreme. A plain, simple looking watch can look elegant and be purposeful at the same time without looking over or understated for the situation.
Tags: diving, durability, durable watches, elegant watches, stylish watches, watches
Posted in Uncategorized | No Comments »
October 15th, 2009
Seiko has a plethora of different styles and qualities within their large assortment of watch offerings. The options available for you to use with your Seiko are just as varied in style and quality.
Diving Watches
If you are the proud owner of one of Seiko’s diving watches and you would like a new band for it, you may want to consider equipping it with a soft rubber watch band, these bands are impervious to water and will stand up to whatever you put it through. They are easy to keep clean and they are not likely to cause any allergic interactions.
Try A New Band
Seiko offers a very wide variety of leather watch bands to fit everything from their slim line elegant style watches to their beat through the bushes and explore the outback type rugged watches. There is a band for every style of Seiko imaginable. If you would rather have a band made from material rather than the standard leather, vinyl or rubber, there is a even canvas straps to service your needs.
When figuring out what you would like to equip your watch with, you’ll want to consider how you will be using it and under what conditions it will be expected to perform. After you have that figured out, you will be able to more readily decide what options are right for you and your watch.
Tags: bands for your seiko watch, changing your seiko watch, diving watch, seiko
Posted in Uncategorized | No Comments »
October 14th, 2009
- Place your watch on a soft but firm surface, if you have it, use a bracelet holder.
- Use either the standard or mini size spring bar tool, whichever works for your watch (small screwdrivers will work too as well as fingernails but the job gets harder that way).
- Insert the forked end between the band and the case lug, you are trying to catch the shoulder of the spring bar with the tool.
- Once you have it, push down towards the band and away from the lug, until the band comes away from the case. Do this carefully so you don’t scratch anything or loose your spring bar, that bar is hard to find if you loose it due to its size.
- Once you have that section removed, move to the other side and repeat the process.
- Now you’re ready for your new band. Insert the spring bar into the ‘case end’ of your new band, then insert one end of the spring bar into the pin hole of the lug. Using your spring bar tool or whatever it was you used to take it off, and compress the bar so you can insert the other end into the other case lug.
- Do the same on the other side and you will have installed your new watch band. If your watch band is metal, make sure you include the end pieces.
Tags: change your watchband, change your wristband, easy, instructions
Posted in Uncategorized | No Comments »
October 13th, 2009
The watch band you choose for your watch will not only say a lot about you, it will also say a good bit about your lifestyle. The watch it will be attached to will also figure prominently in the decision. You don’t want to have a sleek, elegant wrist watch with a bulky or loud wristband. The band and the watch should be complementary and of the same nature.
Chronograph Watch
If you have a big chronograph watch, bands that are made out of such things alligator or any of the large scale reptiles or even ostrich would look fine with this sort of watch.
Thin Watches
A thin line type watch would need to have a much more subtle band such as a fine scaled black snakeskin band or even just a regular thin leather band with no figuring of any kind on it. Let the watch itself be the spokesman and the band just be the support.
Sports Watches
If you have a diving watch and you actually do dive or involve yourself in any water sports that would get your watch wet, you may want to consider waterproof bands such as rubber. A fine rubber watchband is going to be impervious to the intrusion of water and will not have any ill affects should it be exposed for extended periods of time.
Consider what you will be doing while wearing the watch and pick a band that will lend itself to that function.
Tags: chronograph watch, diving, leather watchbands, sports watches, thin watches, watchband
Posted in Uncategorized | No Comments »